Download Brochure
EXTREME LP Series Standard Link and SuperThin™ Link
Designed and developed for those very tight applications on BOP's. The Titan SuperThinTM Series. Links are made to deliver an accurate and repeatable torque in even the tightest applications. The tools are continuous ratcheting and eliminate the heretofore time consuming and innacurate methods used in BOP and other hard to access bolting.
A continuous ratcheting tool. All tools are provided with certification of calibration to +/-3% Torque System accuracy.
| TITAN Model Number | Units | LP 2 | LP 4 |
| Range of Hex Sizes A/F | (in) (mm) |
3/4 to 2-3/8 19 to 60 |
7/8 to 3-1/8 22 to 80 |
| Torque Range | (ft-lb) (n-m) |
190 to 1900 270 to 2700 |
390 to 3900 560 to 5600 |
| Cylinder Weight | (lb) (kg) |
3.45 1.56 |
5.8 2.63 |
| Range of Link Weight | (lb) (kg) |
1.00 to 3.00 0.45 to 1.36 |
4.50 to 6.50 2.01 to 2.90 |
| DIMENSIONS of Titan Ultra Thin Extreme Access Links | |||
| L1-Maximum Reaction Reach | (in) (mm) |
7.00 177.80 |
8.41 213.69 |
| L2-Overall Length | (in) (mm) |
8.90 226.06 |
10.70 271.78 |
| H1-Center of Bolt to Top of Tool | (in) (mm) |
3.86 98.17 |
4.77 121.29 |
| H2-Back End Height | (in) (mm) |
3.45 87.63 |
3.78 96.14 |
| W1-Tool Width at Link | (in) (mm) |
.75 19.00 |
1.00 25.40 |
| W2-Tool Width at Cylinder | (in) (mm) |
1.25 31.75 |
1.75 44.45 |
| R-Tool Radius around Bolt | (in) (mm) |
1.00 to 1.70 26.16 to 44.48 |
1.25 to 2.25 33.32 to 58.47 |
Also check out our Low Profile torque wrenches, Back Up wrenches and T Tools.
